Good signal. Plenty of bandwidth. Video still hitching every few seconds? Your Mac’s peer-to-peer Wi-Fi may be getting in the way of your stream. When AWDL is the cause, turning it off can reduce latency spikes, uneven frame delivery, and audio interruptions. The issue has been reported by Moonlight users for years.

Stop Stutter makes that workaround effortless. Open a selected app → Boost starts. Quit the last selected app → Boost ends. No Terminal commands to repeat. No setting to remember after every game.

Boost ON means AWDL OFF. Your regular Wi-Fi connection stays enabled. Boost controls the peer-to-peer interface, awdl0, during your session. Apple documents the latency impact of peer-to-peer Wi-Fi; AWDL research explains its channel-sharing mechanism.

The trade-off: AirDrop, peer-to-peer AirPlay, and some Continuity features may be unavailable during Boost. AWDL is restored when Boost ends.

These presets identify the native clients automatically. Add other .app bundles from Applications → Add App. Existing selections stay yours; missing presets are available under More apps to boost.

The benefit depends on whether AWDL causes your stutter. Preset support means automatic app detection, not a measured performance gain for each client. See the validation record for what has actually been tested.

One radio, two jobs. AWDL—Apple Wireless Direct Link—is the peer-to-peer interface used by AirDrop and related Apple features. It shares the Mac’s Wi-Fi radio with the connection to your router. AWDL’s discovery and communication schedule can take the radio onto a different channel, leaving normal network packets waiting. The protocol’s channel switching is described in AWDL research, and Apple’s networking engineers explain that peer-to-peer Wi-Fi can also add latency to infrastructure traffic.

A live stream notices short delays. Downloads can buffer and catch up. A game stream needs frames, audio, and inputs delivered consistently. Those brief interruptions can feel like stutter even when a speed test reports excellent bandwidth.

The target is jitter: variation in packet arrival time. A stream can receive plenty of data overall and still receive some of it too late. If AWDL is causing those delays, disabling it can help. Router congestion, packet loss, decoding, and display timing can still cause stutter independently.

Stop Stutter automates the workaround. While Boost is on, its helper turns awdl0 down and listens for the kernel’s interface notifications. macOS can reactivate AWDL at any time, so the helper switches it off again within milliseconds rather than leaving it active until a timer comes around. In Auto mode it brings AWDL back after the final watched app quits, so Apple sharing can resume.

1. Open a repeatable scene in your streaming client over Wi-Fi. Keep the resolution, bitrate, and network setup the same.
2. Compare Off with Always on in Stop Stutter. Watch for recurring hitches and, if available, compare the client’s network-latency variation and dropped-frame statistics over similar intervals.
3. If it helps, switch to Auto and let your selected apps control Boost.

Download Stop Stutter → Free, MIT-licensed, and native to macOS. The diagrams explain the mechanism; the validation record separates verified app behavior from performance measurements.

• Automatic Boost. Moonlight, GeForce NOW, Punktfunk, Parsec, and Steam Link are included. Add any .app with the native application picker.
• Instant enforcement. When macOS brings AWDL back up during a session, the helper reacts to the kernel’s interface notification and turns it off again within milliseconds. A one-second check backs this up, and the interface is only touched when it is in the wrong state.
• Manual control. Choose Always on to hold AWDL off, Off to stop boost, or Auto to follow your selected apps.
• States you can read at a glance. Green Boost is ON means a verified active session. Blue OFF / Auto waiting is ready for your next app launch. Gray OFF / Paused means automation is disabled. Setup, transitions, and errors have their own labels.
• An explanation built in. The ? panel shows why AWDL can cause lag, how boost helps, and what happens to Apple sharing.
• Native Liquid Glass. SwiftUI, real macOS 26+ glass controls, and native materials on macOS 14–15. Supports the system appearance and accessibility settings.
• A quiet menu bar companion. Runs without a Dock icon. Close the main window and boost keeps working; use the menu bar icon to Open Stop Stutter again or Quit. Optional launch at login.
• Clear notifications. Quiet banners when Boost starts, ends, or needs attention. No notification sounds over your stream.
• Recovery built in. Disconnect recovery, ten-second leases, and a durable recovery marker help prevent AWDL from being left off after a crash.
• No accounts, analytics, ads, or dependencies. App choices stay in local preferences. Activity history exists only in memory.

1. Download the universal ZIP from Releases and extract it.
2. Move Stop Stutter.app to Applications, then open it.
3. Click Enable Helper. Approve Stop Stutter under System Settings → General → Login Items & Extensions when macOS asks. Administrator approval is required for the helper.
4. Allow notifications if you want session updates.
5. Choose Auto, then open Moonlight, GeForce NOW, or another selected app.

Updating from 0.1.0: quit Stop Stutter, replace the app, and open it. Then restart your Mac, or use Settings → Remove Helper → Enable Helper, so the new helper replaces the old one. Later updates restart the helper automatically.

Release builds are signed with Developer ID and notarized by Apple. The universal binary supports Apple Silicon and Intel. macOS 14 Sonoma or later is required; Liquid Glass requires macOS 26 Tahoe or later.

Use Applications → Add App to select a client. Apps are matched by bundle identifier, so moving or renaming an app does not break its rule. Toggle a rule off to keep it in the list without triggering boost. Multiple selected clients can run at the same time.

App lifetime, not stream detection: boost starts when the client launches, including its menus, and stays on while it runs in the background. Closing its last window may not quit the client. Use Quit in that client to end its session.

Whole browsers and the Steam launcher are not presets: they often stay open outside a streaming session. For browser-based cloud gaming, use Always on during play or add your browser as a custom rule if you prefer that behavior.

Auto is selected, but boost says OFF? That is expected when none of your watched apps is running. Auto is a rule; the large status shows whether boost is actually active right now. A selected mode alone is never treated as proof that AWDL was disabled.

AirDrop, peer-to-peer AirPlay, and some Continuity features may be unavailable while AWDL is held off. Your regular Wi-Fi interface is not disabled. Stop Stutter restores AWDL when its boost ends; it does not change Bluetooth, Location Services, your router, or SIP.

Events first, timers as a backup. The kernel notifies the helper whenever an interface goes up or down, so a revived AWDL is turned off again at once; a one-second check catches anything missed and expires leases. The app’s two-second heartbeat renews a ten-second lease so a frozen app cannot request Boost forever. These are Stop Stutter’s timings, not AWDL protocol timings. Disconnection releases the lease immediately; restoration begins when no leases remain.

The helper uses Apple’s SMAppService rather than a passwordless sudo rule. The app runs as your normal user; the small helper runs with permission to change AWDL. Both ends validate the peer’s Apple code signature, exact identifier, and signing team using the public XPC code-signing APIs.

Only a boolean boost request crosses XPC. The helper accepts no command strings, custom interfaces, executable paths, or shell arguments. Read the architecture and security notes for failure handling and limitations.

• Normal quit or XPC disconnect: the helper releases the app’s lease and restores AWDL when no other lease remains.
• Frozen app: a lease expires ten seconds after the last heartbeat. The next one-second check attempts recovery.
• Helper crash: launchd restarts the helper. A root-owned recovery marker tells it to restore AWDL before taking new work.
• Sleep or user switching: the app releases boost. Continuous monotonic lease time also expires across sleep; active rules are evaluated again on wake.
• Restore failure: the marker stays in place, the helper retries, and the app shows the error. It does not report success from an exit code alone.

The helper changes nothing while idle unless it owns a pending recovery. After taking control it restores AWDL to up, even if another tool had previously brought it down. Avoid running competing AWDL controllers. A missing interface, an OS failure, or removal of the helper/app before recovery completes can prevent automatic restoration; manual recovery is always available.

Use Xcode 26 or later, with its Command Line Tools selected. The package has no third-party dependencies.

git clone https://github.com/burakgon/stop-stutter.git
cd stop-stutter
swift test
./scripts/build.sh
open "build/Stop Stutter.app"

The default build is an ad-hoc signed UI preview. Privileged helper access is deliberately unavailable for ad-hoc builds. To test the helper, sign with your own Apple Development or Developer ID certificate:

SIGNING_IDENTITY="Developer ID Application: Your Name (TEAMID)" \
  ./scripts/build.sh

Install the resulting app in /Applications. macOS may require notarization before approving a bundled daemon; use the release instructions for a notarized build. Development code can also be opened in Xcode with open Package.swift; use the build script to assemble the complete app with its helper.

Set UNIVERSAL=1 to build for both architectures. The build uses macOS APIs introduced in 26 behind availability checks and deploys to macOS 14.

1. Open Settings in Stop Stutter and disable Launch at login, if enabled.
2. Click Remove Helper. The app first releases its lease and verifies that recovery has finished. Removal is blocked if another signed app session still owns boost.
3. Quit Stop Stutter and move it to the Trash.

Do this before deleting the app bundle: the helper lives inside it. The app does not install sudoers rules or separate scripts. An empty, root-owned recovery directory can remain at /private/var/db/io.github.burakgon.StopStutter; it has no running component.

Quit Stop Stutter, then run:

sudo /sbin/ifconfig awdl0 up

Verify the UP flag with /sbin/ifconfig awdl0. If another app is still requesting boost, release that session first or it will turn AWDL off again.

Bug reports with macOS version, Mac model, client name, and clear reproduction steps are especially useful. Please distinguish observed AWDL behavior from measured streaming improvements. See CONTRIBUTING.md and the manual test checklist.

The README’s infographics are original, scalable SVGs with accessible descriptions. See diagram sources and regeneration to improve or reuse them.

If this helps your stream, a star helps other Mac users find it. Share your results in an issue—especially if you can compare the same session with boost on and off.

Inspired by the Mac streaming community’s investigations, including the Moonlight issue and AWDL troubleshooting notes. Stop Stutter is an independent project, not affiliated with Apple or any of the supported streaming services. Product names and client icons belong to their respective owners. See client icon sources and notices.

MIT © 2026 Ali Burak Goncu.