On npm 11.x? npx can crash during install with Cannot destructure property 'package' of 'node.target' (an npm/arborist bug, before GitNexus runs). Use pnpm instead — it builds the native deps explicitly:

pnpm --allow-build=@ladybugdb/core --allow-build=gitnexus --allow-build=tree-sitter dlx gitnexus@latest analyze

Or install globally (npm install -g gitnexus@latest) and run gitnexus analyze. See #1939.

Fastest MCP startup: install globally (npm i -g gitnexus) before running gitnexus setup — this writes an absolute-path MCP config that bypasses npx entirely. On a cold cache, an npx-based MCP install can exceed Claude Code's MCP_TIMEOUT default (~30s).

No C++ toolchain? Set GITNEXUS_SKIP_OPTIONAL_GRAMMARS=1 before npm install -g gitnexus to skip the vendored grammar materialize/build for tree-sitter-dart, tree-sitter-proto, tree-sitter-swift, and tree-sitter-kotlin — those four languages won't be parsed, but install completes in seconds without python3/make/g++. Strict =1 only — any other value falls through to the rebuild.

Local embeddings are opt-in. Default npm install does not fetch @huggingface/transformers or onnxruntime-node. Run gitnexus embeddings install (or gitnexus analyze --embeddings, which auto-heals) to fetch the stack through your npm registry config into ~/.gitnexus/embedding-runtime. CUDA GPU binaries still use NuGet via --cuda (#2370). The prefix needs Node with module.registerHooks (≥ 22.15 on 22.x, ≥ 23.5 on 23.x). A leftover 1.6.12 package-first tree is residual until a clean reinstall; --force only refreshes prefix overrides.

About tree-sitter-kotlin: like Dart/Proto/Swift, Kotlin is a vendored grammar (under gitnexus/vendor/tree-sitter-kotlin). Upstream ships source only (no prebuilt binaries), so GitNexus cross-builds the platform prebuilds itself (via the build-tree-sitter-prebuilds GitHub Actions workflow) and vendors them — the same uniform pipeline used for Dart, Proto, and Swift. node-gyp-build selects the right .node at require time, so no C/C++ toolchain is needed. If no prebuild matches your platform-arch, only Kotlin (.kt/.kts) parsing is unavailable; the rest of gitnexus is unaffected.

Claude Code (full support — MCP + skills + hooks):

# macOS / Linux
claude mcp add gitnexus -- npx -y gitnexus@latest mcp

# Windows
claude mcp add gitnexus -- cmd /c npx -y gitnexus@latest mcp

Codex (full support — MCP + skills + hooks):

codex mcp add gitnexus -- npx -y gitnexus@latest mcp

Or via ~/.codex/config.toml (system scope) / .codex/config.toml (project scope):

[mcp_servers.gitnexus]
command = "npx"
args = ["-y", "gitnexus@latest", "mcp"]

Codex hooks (PreToolUse graph enrichment + PostToolUse stale-index detection in ~/.codex/hooks.json, same schema as Claude Code) need the bundled adapter script, so they are installed by gitnexus setup -c codex rather than manually.

Alternatively, install everything as a Codex plugin (MCP + skills + hooks in one step):

codex plugin marketplace add abhigyanpatwari/GitNexus
# then inside Codex: /plugins → install "GitNexus"

Codex notes: SessionStart is intentionally not registered — Codex reads AGENTS.md natively, which already carries the GitNexus context block. Newly installed hooks need a one-time approval in Codex via /hooks before they run. Pick one install route (gitnexus setup -c codex or the plugin): plugin hooks load alongside ~/.codex/hooks.json, so installing both can fire duplicate hooks per tool call.

Factory (Droid) — MCP + skills via gitnexus setup -c droid, or add the server manually to ~/.factory/mcp.json (user scope, applies to all projects):

{
  "mcpServers": {
    "gitnexus": {
      "command": "npx",
      "args": ["-y", "gitnexus@latest", "mcp"]
    }
  }
}

gitnexus setup -c droid also installs skills to ~/.factory/skills/. For the PostToolUse search-augment hook, install the bundled gitnexus-factory-plugin/ — from a marketplace that includes this repo, run droid plugin install gitnexus@<marketplace>, or point Droid at it via extraKnownMarketplaces in .factory/settings.json. Factory reads AGENTS.md natively, which already carries the GitNexus context block.

Cursor (~/.cursor/mcp.json — global, works for all projects):

{
  "mcpServers": {
    "gitnexus": {
      "command": "npx",
      "args": ["-y", "gitnexus@latest", "mcp"]
    }
  }
}

Antigravity (Google) — ~/.gemini/antigravity/mcp_config.json:

{
  "mcpServers": {
    "gitnexus": {
      "command": "npx",
      "args": ["-y", "gitnexus@latest", "mcp"]
    }
  }
}

gitnexus setup also merges an AfterTool entry into ~/.gemini/settings.json (under the canonical Gemini CLI hooks schema) and installs skills to ~/.gemini/antigravity/skills/. Existing user hooks are preserved. The hook adapter's path is rewritten at install time, so run gitnexus setup rather than hand-editing.

OpenCode (~/.config/opencode/config.json):

{
  "mcp": {
    "gitnexus": {
      "type": "local",
      "command": ["gitnexus", "mcp"]
    }
  }
}

CodeBuddy (Tencent) — priority chain, edit the first non-empty file that exists: ~/.codebuddy/.mcp.json (recommended) → ~/.codebuddy/mcp.json (deprecated) → ~/.codebuddy.json (legacy). CodeBuddy reads only the first existing file, so adding servers to a higher-priority file than the one currently in use would hide the servers below it. Create ~/.codebuddy/.mcp.json only if none exist:

{
  "mcpServers": {
    "gitnexus": {
      "command": "npx",
      "args": ["-y", "gitnexus@latest", "mcp"]
    }
  }
}

Qoder (Alibaba) — ~/.qoder.json:

{
  "mcpServers": {
    "gitnexus": {
      "command": "npx",
      "args": ["-y", "gitnexus@latest", "mcp"]
    }
  }
}

Set GITNEXUS_MCP_READ_ONLY=1 before starting the MCP server to expose only the proven single-repository read surface. Raw cypher, rename and group tools, group routing, and group resources are omitted from discovery and rejected before backend dispatch. Tool descriptions and generated setup/context resources are scrubbed so they do not recommend unavailable routes.

The default is unchanged when the variable is unset or 0. Any other value fails server startup rather than silently weakening the policy.

Set GITNEXUS_MCP_ALLOWED_REPOS to a comma-separated list of canonical registry names or absolute indexed paths. Entries are trimmed, resolved against the registry, and deduplicated at startup. When exactly one repository is allowed it becomes the implicit default; when several are allowed, callers must select one unless GITNEXUS_MCP_DEFAULT_REPO is also set.

The default repository must resolve to an allowed repository. Invalid, ambiguous, blank, or mismatched configuration fails startup before stdio or HTTP begins serving. The allowlist applies to tools, aliases, discovery, resources, templates, implicit resolution, and embedded HTTP; hidden repository details are not included in selection errors. Setting only GITNEXUS_MCP_DEFAULT_REPO chooses a default without restricting explicit repository selections. An allowed repository whose name is duplicated in the registry must be configured by path, and its context resource is only served for the unique name form.

The query, context, and impact tools accept an optional positive-integer maxTokens argument. It bounds the complete formatted MCP response, including hints and error text, using a deterministic four-UTF-8-bytes-per-token estimate. When truncation is required, the response ends with … and remains valid UTF-8.

Set GITNEXUS_MCP_DEFAULT_MAX_TOKENS to apply the same guardrail when callers do not send maxTokens. An explicit tool argument takes precedence. Leaving both unset preserves the existing response byte-for-byte; this is a transport guardrail, not semantic pagination or an exact model-specific tokenizer limit.

gitnexus eval-server binds to 127.0.0.1 by default. Loopback bindings do not require authentication. Any non-loopback bind, including 0.0.0.0, a LAN address, or a hostname that resolves to a LAN IPv4 address, requires GITNEXUS_AUTH_TOKEN. Every endpoint then requires an exact Authorization: Bearer <token> header.

GITNEXUS_AUTH_TOKEN='replace-me' gitnexus eval-server --host 0.0.0.0

The token may be set in the shell, .env.local, or .env in the working directory. Precedence is shell > .env.local > .env. Only GITNEXUS_AUTH_TOKEN is read from those files; their other values are not added to the process environment. Keep token files uncommitted.

gitnexus analyze --force         # Full graph + FTS rebuild (reuses unchanged parser output)
gitnexus analyze --no-parse-cache # Full rebuild that re-parses every source file
gitnexus analyze --repair-fts    # Fast path: rebuild/verify only FTS indexes on existing index data
gitnexus analyze --skip-fts      # Index graph/embeddings without loading FTS or building keyword indexes
gitnexus analyze --skills        # Generate repo-specific skill files from detected communities
gitnexus analyze --skip-embeddings  # Skip embedding generation (faster)
gitnexus analyze --embeddings [limit]  # Enable embedding generation (slower, better search)
gitnexus analyze --skip-agents-md   # Preserve custom AGENTS.md/CLAUDE.md gitnexus section edits
gitnexus analyze --skip-skills      # Skip installing standard skill files under .claude/skills/ and .agents/skills/
gitnexus analyze --skip-git         # Index folders that are not Git repositories
gitnexus analyze --default-branch develop  # Branch used in the generated regression-compare example (base_ref)
gitnexus analyze --verbose       # Log skipped files when parsers are unavailable
gitnexus analyze --worker-timeout 60  # Increase worker idle timeout for slow parses
gitnexus analyze --workers <n>   # Parse worker pool size (>=1; default: cores-1, capped at 16,
                                 # auto-sized to the repo). 0 is rejected — there is no sequential mode.
gitnexus analyze --max-processes <n>  # Process-detection process cap (replaces dynamic max(20, round(symbols/10)))
gitnexus analyze --max-entry-point-candidates <n>  # Ranked entry-point pool (default 200; raise when the warning names it)
gitnexus analyze --spring-actuator ./actuator  # Enrich with local Spring Boot Actuator JSON snapshots
gitnexus analyze --asyncapi-spec ./docs/asyncapi  # Resolve broker addresses from AsyncAPI 3.x documents
gitnexus analyze --memory-budget 3000  # Main-thread V8 heap in MB (>= 200); overrides the auto-sizer and --max-old-space-size
gitnexus analyze --wal-checkpoint-threshold 67108864  # LadybugDB WAL auto-checkpoint threshold in bytes
                                 # (default 67108864 = 64 MiB; -1 keeps Ladybug stock ~16 MiB)

--skip-fts (or GITNEXUS_SKIP_FTS=1) disables FTS extension loading and keyword-index construction for this analysis. Graph queries, communities, processes, and existing embeddings remain available. Status and search report "FTS disabled for this index". Remove both the flag and environment setting and run analyze again to restore keyword search, even at the same commit. Only the exact environment value 1 enables the opt-out; the flag takes precedence. It cannot be combined with --repair-fts. Disabling an existing FTS index may require one graph-store rebuild to avoid unsafe writes through native indexes.

--spring-actuator is explicitly opt-in and accepts either a JSON bundle keyed by mappings, beans, conditions, configprops, and/or env, or a directory containing endpoint-named JSON files. It confirms matching static nodes and adds conservative runtime-only routes, beans, and property keys. The configured input is excluded from source scanning; only normalized repository-relative exclusions are retained for future scans, never absolute paths. Env/configprops values, origins, condition messages, and source names are never persisted or printed. Because snapshots are external runtime state, an enabled run always rebuilds; the first later run without the option rebuilds once to remove runtime evidence. The same path can be set as springActuator in .gitnexusrc.

--asyncapi-spec is explicitly opt-in and accepts a directory of AsyncAPI documents or a single document; the path is resolved against the repository root, so a committed docs/asyncapi and an absolute cache written by something else both work. Each operations[] entry of an AsyncAPI 3.x document can contribute a Destination node keyed by broker and address, with action: send emitting PUBLISHES_TO and action: receive emitting CONSUMES_FROM, so a document and source code that name one address on one broker land on the same node. Edges start at the document, not at a callable — a document states that the service talks to an address, not which method does — and no address a document names is ever attached to an unresolved source site.

An operation must name a protocol, either through its own bindings or through the servers[].protocol of the servers its channel resolves to (a channel that lists no servers resolves to all of them); operations that name none are refused, as are operations whose two readings name different brokers, and channels that inherit a multi-protocol server set without choosing. HTTP and WebSocket documents are refused for destination minting: there the host rather than the address names the place, and an HTTP endpoint is already modelled as a Route. A parameterized address — a channel declaring parameters, or an address containing { — is refused rather than keyed: two services publishing {env}.orders share a pattern, not a queue. AsyncAPI 2.x is refused under its own counted reason and never mapped, because its publish/subscribe are inverted relative to 3.x send/receive and a naive mapping would reverse the async graph while leaving it connected. Every refusal is counted, and a configured path that yields nothing is reported rather than passed over in silence.

Like Actuator snapshots, documents are external to git freshness — replacing one moves no commit and dirties no file — so an enabled run always rebuilds, and the first later run without the option rebuilds once to remove document-derived evidence. There is no glob-based auto-discovery, and the option is unsupported with --watch.

If analyze reports a worker parse timeout on a large or unusual repository, it keeps running and falls back safely. To give slow worker jobs more time, use --worker-timeout 60 or set GITNEXUS_WORKER_SUB_BATCH_TIMEOUT_MS=60000. For very large files, GITNEXUS_WORKER_SUB_BATCH_MAX_BYTES controls the worker job byte budget.

Embeddings node limit — gitnexus analyze --embeddings generates semantic search vectors with a default 50,000-node safety cap to protect memory on large repositories:

gitnexus analyze --embeddings          # default 50,000 node safety cap
gitnexus analyze --embeddings 0        # disable the cap entirely
gitnexus analyze --embeddings 100000   # custom cap

If embeddings are skipped on a large repository, the indexed graph likely exceeds the default cap — re-run with --embeddings 0 or a higher limit.

gitnexus auto-sync clones or pulls configured repositories, analyzes new commits, and optionally syncs their group. It runs once immediately, then repeats on the configured interval. It runs in the foreground; use your process manager if it must survive a shell session. gitnexus watch is reserved and prints this split; it does not start auto-sync or local file watching.

# 1. Create the config once. It never overwrites an existing file.
gitnexus auto-sync init

# 2. Edit $GITNEXUS_HOME/watch_config.yml, then start it.
gitnexus auto-sync start              # `gitnexus auto-sync` is equivalent
gitnexus auto-sync status
gitnexus auto-sync restart            # Required after config changes
gitnexus auto-sync stop
gitnexus auto-sync reset             # Clear failure state; leaves clones and indexes intact

GITNEXUS_HOME defaults to ~/.gitnexus. A minimal configuration:

sync_interval_minutes: 10
analyze_timeout: 5m
# Extra hosts beyond github.com, gitlab.com, and gitee.com. Exact names only.
# allowed_hosts: [gitlab.mycompany.com]
projects:
  - local_path: /absolute/path/to/clones
    branches: [main, master]
    # pdg: omit = preserve live index mode; true = keep PDG current;
    # false = init default (warns, then strips PDG on the next successful rebuild).
    # Do not paste pdg: false onto an existing watch file unless you intend to drop PDG.
    pdg: false
    overwrite_local_changes: false
    remote_urls:
      - git@github.com:owner/repo.git

• sync_interval_minutes must be at least 5; local_path must be an absolute path. Clones are stored below it as host/namespace/repo.
• Remote URLs may use SSH SCP or HTTPS. Hosts are github.com, gitlab.com, and gitee.com unless listed in top-level allowed_hosts (exact DNS names, no wildcards). The CLI image includes OpenSSH; mount keys yourself. Invalid watch_config.yml skips auto-sync immediately. Auto-sync honors .gitnexusrc embeddings (HTTP embeddings env still required in the image).
• branches are tried in order. The legacy branch field is supported, but do not set both.
• Set per-project pdg: true to keep the full control-flow, control/data-dependence, and taint layers current. Untouched configs that omit pdg preserve an existing index's mode and cannot silently strip PDG data. Do not paste pdg: false from this example onto an existing watch file unless you intend to drop PDG; an explicit false opt-out logs a warning before removing existing PDG data. Auto-sync requests atomic incremental publication where supported, so readers keep using the previous graph until a successful update is ready and a failed staged analysis leaves it intact; unsupported paths retain the analyzer's existing in-place behavior.
• Analysis runs in an isolated worker; analyze_timeout defaults to half of sync_interval_minutes, but may be longer (for example, a 30m analysis timeout with 5 minute polling) up to Node's timer limit. If a polling tick arrives while analysis is active, it is coalesced into one immediate follow-up run using the newest commit. If the parent times out and leaves that worker running, the follow-up is deferred to the next interval so a leftover lock holder is not counted as a hard analyze failure. Timeout and auto-sync stop request safe cancellation; a worker in native work exits after reaching a JS-visible safe point. Until then, auto-sync reports cancelling or stopping and retains ownership so another auto-sync cannot take over, for up to 5 seconds — after that the parent stops waiting and leaves the worker to exit on its own rather than killing it mid-write. This behavior is the same on macOS and Windows. overwrite_local_changes defaults to false, so a dirty local clone is skipped rather than overwritten; setting it to true also deletes untracked files in the clone, while keeping ignored paths.
• Add group_name only after creating that group with gitnexus group create <name>. Partial clone output is isolated and removed after 14 days.

See the full auto-sync configuration and runtime reference for concurrency, timeouts, failure thresholds, and runtime files.

Commit a .gitnexusrc JSON file at the repo root to preconfigure recurring analyze options per project, instead of re-passing the same flags every run. It is read from the resolved repo root (not .gitnexus/, which is gitignored index storage). CLI flags always override .gitnexusrc.

{
  // Default branch used in the generated regression-compare example (base_ref).
  // Use this so a project on `develop`/`master` doesn't get "main" rewritten
  // over its fix on every analyze. (Alias: "branch".)
  "defaultBranch": "develop",
  "skipContextFiles": true, // alias of skipAgentsMd: keep your own AGENTS.md/CLAUDE.md
  "skipSkills": true, // don't install standard skill files under .claude/skills/ and .agents/skills/
  "embeddings": true, // generate embeddings by default
  "springActuator": "./actuator", // optional local runtime snapshot directory or bundle
  "workerTimeout": 60,
}

A nested analyze block is also accepted (and overrides flat keys for the same option):

{ "analyze": { "defaultBranch": "develop", "skipSkills": true } }

Notes:

• The default branch is resolved as: --default-branch > .gitnexusrc defaultBranch/branch > auto-detected origin/HEAD > main.
• skipContextFiles / skipAiContext are aliases for skipAgentsMd — they skip the AGENTS.md / CLAUDE.md block only. They do not imply skipSkills. indexOnly is the stronger option that skips all file injection.
• Supported keys: defaultBranch (branch), skipAgentsMd (skipContextFiles, skipAiContext), skipSkills, indexOnly, stats/noStats, embeddings, dropEmbeddings, name, allowDuplicateName, maxFileSize, workerTimeout, walCheckpointThreshold, workers, maxProcesses, maxProcessBranching, maxProcessTraceDepth, maxEntryPointCandidates, springActuator, embeddingThreads, embeddingBatchSize, embeddingSubBatchSize, embeddingDevice.
• The file is JSON only. Unknown keys and wrong JSON types fail fast with an actionable error before analysis starts. Process-detection knobs (maxProcesses, maxProcessBranching, maxProcessTraceDepth, maxEntryPointCandidates) that are not a positive integer warn and fall through to env, then the built-in default.

Most analyze knobs are also CLI flags (--workers, --worker-timeout, --max-file-size, --verbose). Use the env-var form when you'd otherwise repeat the same flag every run, or when invoking GitNexus from a long-running host (MCP server, eval-server, CI shell) that already manages its own environment. CLI flags take precedence over .gitnexusrc, which takes precedence over env vars, which take precedence over built-in defaults.

GITNEXUS_VECTOR_MAX_DISTANCE controls which vector candidates enter hybrid search. Cosine distance is lower for more similar vectors; the appropriate cutoff depends on the embedding model and repository. A higher cutoff can recover useful semantic matches, but can also admit less relevant hits and change the fused ranking. The default is 0.6 for CLI and MCP query, and 0.5 for the standalone semantic-search function.

For an index that already has embeddings, compare the default with 0.8 and 1.0 on representative queries, including paraphrases, exact symbol names, and queries that should have no relevant result:

GITNEXUS_VECTOR_MAX_DISTANCE=0.8 gitnexus query "how are expired sessions removed" --limit 10

Check both whether the expected symbols appear and where they rank. In #3457, the reporter's voyage-code-4 sample found 20 of 32 paraphrased targets at 0.6, 25 at 0.8, and 28 at 1.0. Those values are a tuning starting point for that model, not universal recommendations: one paraphrased target fell from first to twelfth at 1.0. The sample covered eight repositories, recorded no raw distances, used agent-written queries after reading the code, and did not send Voyage's input_type.

Set the variable in the process that runs the search. For MCP, add it to the server's launch environment and restart the server; for gitnexus serve, set it in that process's environment and restart it. Setting it only during analyze, or exporting it in another shell, does not configure an existing server. Changing the cutoff requires no reindex.

The cutoff only filters available vector candidates. It cannot add missing embeddings or repair a mismatch between the indexing and query-time embedding configuration; see the embeddings runbook. A cutoff of 2 is very permissive, but still rejects distance exactly 2 and retains the search candidate limits.

gitnexus uninstall reverses gitnexus setup — it removes the GitNexus MCP entries, hooks, and skill directories it added to each detected editor. Skill directories are identified by bundled gitnexus skill name (e.g. gitnexus-cli/), so if you customized files inside an installed skill directory, back them up first. It is a dry-run preview by default and prints the exact paths it would remove; pass --force to apply. Per-repo indexes (gitnexus clean --all) and the global npm package (npm uninstall -g gitnexus) are left for you to remove.

looptech-ai/understand-quickly is a public registry of code-knowledge graphs that lists gitnexus@1 as a first-class format. After registering your repo once (npx @understand-quickly/cli add or the wizard), gitnexus publish fires a single repository_dispatch event so the registry resyncs your entry on demand instead of waiting for the nightly job.

It is opt-in and a no-op without UNDERSTAND_QUICKLY_TOKEN — a fine-grained GitHub PAT with Repository dispatches: write on the registry repo. Nothing else happens; no graph file is uploaded. See the protocol spec for the full contract.

# Server
docker run --rm -d \
  --name gitnexus-server \
  -p 4747:4747 \
  -v gitnexus-data:/data/gitnexus \
  ghcr.io/abhigyanpatwari/gitnexus:latest

# Web UI
docker run --rm -d \
  --name gitnexus-web \
  -p 4173:4173 \
  ghcr.io/abhigyanpatwari/gitnexus-web:latest

Optional env file (override image tags, container names, ports, workspace dir):

cp .env.example .env
docker compose --env-file .env up -d

Files:

• Dockerfile.web — builds gitnexus-shared and gitnexus-web, then serves the production frontend.
• Dockerfile.cli — builds the CLI/server (with its native deps) and runs gitnexus serve --host 0.0.0.0. Local embeddings are not in the image (onnxruntime-node is opt-in; runtime npm is stripped). Bind-mount a prefix or set GITNEXUS_EMBEDDING_URL.
• docker-compose.yaml — starts both signed images side by side.
• .env.example — overrides for image names, container names, ports, and the workspace mount.

The Docker images are version-locked to the npm package:

• Stable images are only published from vX.Y.Z git tags (via docker.yml triggered directly by the tag push), and the workflow refuses to build unless the tag exactly matches gitnexus/package.json's version. So ghcr.io/abhigyanpatwari/gitnexus:1.6.2 (and its Docker Hub mirror akonlabs/gitnexus:1.6.2) is byte-for-byte the same release as npm install gitnexus@1.6.2 — no drift, no floating builds from main. Both registries receive the same digest from a single build step, so you can pull from either and the signature verifies identically.
• Release-candidate images (e.g. :1.7.0-rc.1) are published alongside each RC npm release. They are built by publish.yml calling docker.yml as a reusable workflow after the RC tag is created and pushed.
• :latest is auto-promoted only from non-prerelease tags by the Docker metadata action, so it always points at a real, npm-published version.

Both images are signed with Cosign keyless signing using the workflow's GitHub OIDC identity, and shipped with build provenance and SBOM attestations. This is your protection against supply-chain attacks: even if an attacker republishes a same-named image elsewhere (or somehow pushes to a typo-squatted registry), they cannot forge a Cosign signature tied to abhigyanpatwari/GitNexus's docker.yml. Always verify before pulling into sensitive environments.

Stable releases — signed from the v* tag ref:

cosign verify ghcr.io/abhigyanpatwari/gitnexus:1.6.2 \
  --certificate-identity-regexp '^https://github\.com/abhigyanpatwari/GitNexus/\.github/workflows/docker\.yml@refs/tags/v[0-9]+\.[0-9]+\.[0-9]+(-[a-zA-Z0-9.]+)?$' \
  --certificate-oidc-issuer https://token.actions.githubusercontent.com

# Same signature verifies the Docker Hub mirror (identical digest):
cosign verify docker.io/akonlabs/gitnexus:1.6.2 \
  --certificate-identity-regexp '^https://github\.com/abhigyanpatwari/GitNexus/\.github/workflows/docker\.yml@refs/tags/v[0-9]+\.[0-9]+\.[0-9]+(-[a-zA-Z0-9.]+)?$' \
  --certificate-oidc-issuer https://token.actions.githubusercontent.com

The regex pins the certificate identity to this repo's docker.yml workflow run from a v* tag — rejecting unsigned images, images signed by other workflows, and images signed from unprotected refs. It is identical for both registries because both sets of tags were signed at the same digest in one workflow run.

Release candidates — signed from refs/heads/main (the caller's ref when publish.yml invokes docker.yml as a reusable workflow):

cosign verify ghcr.io/abhigyanpatwari/gitnexus:1.7.0-rc.1 \
  --certificate-identity 'https://github.com/abhigyanpatwari/GitNexus/.github/workflows/docker.yml@refs/heads/main' \
  --certificate-oidc-issuer https://token.actions.githubusercontent.com

You can also inspect the build provenance and SBOM:

cosign download attestation ghcr.io/abhigyanpatwari/gitnexus:1.6.2 \
  --predicate-type https://slsa.dev/provenance/v1

Kubernetes: enforce signatures at admission. Ship the bundled ClusterImagePolicy so the Sigstore policy-controller rejects any GitNexus pod whose image is not signed by this repo's docker.yml running from a vX.Y.Z tag — the same identity the cosign verify snippet above pins.

# 1. Install the controller (one-time, cluster-wide)
helm repo add sigstore https://sigstore.github.io/helm-charts && helm repo update
helm install policy-controller -n cosign-system --create-namespace \
  sigstore/policy-controller

# 2. Opt your namespace in
kubectl label namespace <your-ns> policy.sigstore.dev/include=true

# 3. Apply the policy
kubectl apply -f deploy/kubernetes/cluster-image-policy.yaml

After this, attempting to deploy an unsigned image — or one signed by anything other than abhigyanpatwari/GitNexus's docker.yml at a v* tag — fails the admission webhook before a pod is ever created. This turns the verifiable signature into an enforced policy, which is the supply-chain control most clusters actually need.